One thing to consider is the type of trailer you will be using. If you have a flatbed trailer, then you will need different tie downs than if you have a ramps trailer. Flatbed trailers tend to have less movement, so you won’t need as much support for your ATV. Ramps trailers, on the other hand, can be quite bouncy, so you will need heavier duty tie downs.
Another consideration is the weight of your ATV. If you have a heavy ATV, then you will need sturdier tie downs so that it doesn’t move around too much during transport. On the other hand, if you have a lightweight ATV, then you won’t need as heavy duty of tie downs and they can be easier to install and remove.
Whatever type of trailer you have and whatever the weight of your ATV, there is a tie down system that will work best for you. Be sure to shop around and compare products before making your final decision so that you get exactly what you need.
Why Atv Tie Down System Is Necessary?
An all-terrain vehicle, or ATV, is a necessity for anyone who loves the outdoors. They provide a great way to get around on rough terrain, and they can be a lot of fun to ride. However, before you head out on your next ATV adventure, it’s important to make sure you have the best ATV tie down system in place.
A good tie down system will keep your ATV secure while you’re driving it. It will also help to protect your investment by keeping theATV from being damaged while in transit. There are many different types of tie downs available on the market today, so it’s important to do some research to find the one that best suits your needs.
One of the most popular types of tie downs is the ratchet strap system. This type of system uses a series of straps that are tightened down over the top of your vehicle. The ratchet mechanism allows you to adjust the tension on these straps so that they’re tight enough to hold your vehicle in place, but not so tight that they damage it.
Another popular option is known as an axle strap system. This type of system uses two straps that go around each tire and connect at an axle point located in front of or behind the tires. This helps distribute weight evenly across all four tires and prevents them from slipping or rolling over during transit.
Our Top Picks For Best Atv Tie Down System
Best Atv Tie Down System Guidance
Pulling an ATV or other off-road vehicle behind your truck or trailer is a great way to enjoy the outdoors. But, it’s important to make sure your vehicle is securely fastened down. The DC Cargo Mall ATV Wheel Chock & Strap Kit is a complete tie-down system that will give you the peace of mind you need when transporting your ATV.
This ATV tie-down kit includes everything you need to secure two tires. The four 12-gauge steel wheel chocks are powder-coated for corrosion resistance and have double anchor slots to accommodate large and small tires. The two 7′ x 2″ blue industrial-grade E-Track polyester ratchet straps have reinforced stitching and adjust to fit tire sizes 10″ – 32″ in diameter.
Installing the DC Cargo Mall ATV Wheel Chock & Strap Kit is quick and easy. Simply ride your ATV into position and bolt the chocks down in front and back of the rear tires. Then, wrap the straps around the tires and snap them into the E-Track slots on the chocks. Ratchet tight, and you’re ready to go!
This permanently-mounted tie-down system is ideal for those who haul
Common Questions on DC Cargo Mall ATV Wheel Chock & Strap Kit | Trailer Tie Down System for ATV’s, UTV’s, & Mowers
• What is DC Cargo Mall ATV Wheel Chock & Strap Kit?The DC Cargo Mall ATV Wheel Chock & Strap Kit is a trailer tie down system for ATV’s, UTV’s, & mowers.
• How does the DC Cargo Mall ATV Wheel Chock & Strap Kit work?
The DC Cargo Mall ATV Wheel Chock & Strap Kit works by chocking the wheels of your ATV, UTV, or mower, and then securing it with straps.
• How do I use the DC Cargo Mall ATV Wheel Chock & Strap Kit?
To use the DC Cargo Mall ATV Wheel Chock & Strap Kit, simply chock the wheels of your ATV, UTV, or mower, and then secure it with straps.
• What are the benefits of using the DC Cargo Mall ATV Wheel Chock & Strap Kit?
The benefits of using the DC Cargo Mall ATV Wheel Chock & Strap Kit include improved safety and security for your ATV, UTV, or mower while transport.
• Where can I buy the DC Cargo Mall
Why We Like This
• • E Track polyester ratchet straps with reinforced stitching for industrial grade strength• • 12 gauge steel wheel chocks powder coated for corrosion resistance• • Galvanized bolts, nuts, and washers for maximum durability• • Fits tire sizes 10” 32” in diameter• • Maximum vehicle weight: 1,500 lbs.
Additional Product Information
| Color | Blue and Black |
| Height | 1 Inches |
| Length | 84 Inches |
Erickson 09160 Wheel Chock Tie-Down Kit is the perfect way to secure your off road vehicles to your trailer during transit. The kit includes 4 wheel chocks and two 2″ x 75′ ratchet straps, which are ideal for use on tires 10″ – 30″ diameter. The heavy duty ATV tire tie down straps can secure two wheels of vehicles weighing up to 1500 lbs. The permanently mounted wheel chocks are designed to be driven over during loading and unloading.
Common Questions on Erickson 09160 Wheel Chock Tie-Down Kit
• What are the dimensions of the Erickson 09160 Wheel Chock Tie-Down Kit?The chock is 9″ long x 4″ wide x 3″ high, and the strap is 10′ long.
• How much weight can the Erickson 09160 Wheel Chock Tie-Down Kit hold?
The chock can hold up to 16,500 lbs.
• What is the weight of the Erickson 09160 Wheel Chock Tie-Down Kit?
The entire kit weighs 3.5 lbs.
• How do you use the Erickson 09160 Wheel Chock Tie-Down Kit?
First, position the chock in front of or behind the wheel. Then, loop the strap around the tire and through the chock, and pull tight. Last, cinch the ratchet to secure the strap.
Why We Like This
• 1) Over the wheel straps for secure transport• 2) Safe tire hold down for ATV’s & UTV’s• 3) Includes 4 wheel chocks & 2 ratchet straps• 4) Heavy duty ATV tire tie down straps• 5) Permanently mounted wheel chocks
Additional Product Information
| Color | Blue, Yellow |
| Height | 4 Inches |
| Length | 8.5 Inches |
| Weight | 2.20462262 Pounds |
The Rhino USA Wheel Chock Tie Down Kit is the perfect way to secure your vehicle while transporting it. The kit includes all hardware required for mounting your chocks on the trailer, and the chocks themselves are simple and easy to install. With a breaking strength of 1,986lbs, you can be confident that your vehicle is secure when transporti
Common Questions on Rhino USA Wheel Chock Tie Down Kit (1,986lb Break Strength) Ultimate Heavy Duty Trailer Tire Straps System for ATV, UTV, Lawn Mower & More – Ratchet Tie Downs Accessories with E Track for Four Wheeler
• What is the Rhino USA Wheel Chock Tie Down Kit (1,986lb Break Strength) Ultimate Heavy Duty Trailer Tire Straps System for ATV, UTV, Lawn Mower & More – Ratchet Tie Downs Accessories with E Track for Four Wheeler?The Rhino USA Wheel Chock Tie Down Kit is an ultimate heavy duty trailer tire straps system that has a break strength of 1,986lbs. It is designed for ATVs, UTVs, lawn mowers, and more. It includes ratchet tie downs and E track for four wheelers.
• How do you use the Rhino USA Wheel Chock Tie Down Kit?
The Rhino USA Wheel Chock Tie Down Kit is easy to use. Simply place the chock under the tire, loop the strap around the tire and through the E track, and then pull tight. Repeat this process five times with unique values for each tire.
Why We Like This
• • Real Lifetime Warranty All inclusive Set Simple & Easy to Install Confidence & Peace of Mind Guaranteed 5 Star Experience
Additional Product Information
| Height | 4.5 Inches |
| Length | 10.25 Inches |
Do you love going on off-road adventures with your ATV or UTV, but hate the hassle of trying to secure your vehicle on the trailer? Well, now there’s a solution that will make strapping down your four-wheeler a breeze – the AUTOAlkins Wheel Chock Tie Down Kit!
This complete tie down system includes four steel wheel chocks, two polyester ratchet straps, and all the necessary bolts, nuts, and washers. The ratchet straps adjust to fit tire sizes 10″ – 32″ in diameter, making them perfect for securing any size ATV or UTV. And because they’re made from high-quality materials, you can trust that they’ll keep your vehicle securely in place, even on the roughest dirt roads.
Installing the AUTOAlkins Wheel Chock Tie Down Kit is quick and easy. Simply roll your vehicle into place, wrap the straps around the tire, then snap into the E-Track slot on the wheel chocks and tighten the ratchets. That’s it! In just minutes, your ATV will be safely secured and ready to hit the road.
So whether you’re headed to the trails or the dunes, make sure your vehicle
Common Questions on AUTOAlkins Wheel Chock Tie Down Kit, Trailer Tie Down Strap Kit, Heavy Duty Trailer Tie Down System for UTV, ATV, Mower, etc, Wheel Chock & Tie-Down Accessories
• What is the weight capacity of the AutoAlkins Wheel Chock Tie Down Kit?The AutoAlkins Wheel Chock Tie Down Kit has a weight capacity of up to 1,200 pounds.
• What is the maximum length of the trailer tie down straps?
The maximum length of the trailer tie down straps is 10 feet.
• What is the width of the Heavy Duty Trailer Tie Down System?
The Heavy Duty Trailer Tie Down System is 2 inches wide.
• How many wheel chocks are included in the kit?
Two wheel chocks are included in the kit.
Why We Like This
• 1. 4 steel wheel chocks and 2 polyester ratchet straps included• 2. Straps adjust to fit tire sizes 10″ 32″ in diameter• 3. Can be used for ATV, UTV, Mowers, etc.• 4. Easy to install• 5. Maximum vehicle weight: 1500lbs
Additional Product Information
| Color | yellow |
With the Autofonder Vehicle Wheel Chock Tie Down kit 1986lb Work Load Limit Ultimate Heavy Duty Trailer Tire Straps System for ATV,UTV,Lawn Mower, you’ll be able to quickly and easily secure ATVs, UTVs, golf carts, riding mowers, and other off-road vehicles to your trailer or pickup bed. The E-track straps are up to 9 feet in length, and can be easily adjusted to fit tire sizes 10” – 35” in diameter. The wheel chocks are powder-coated for corrosion resistance, and have double anchor slots that accommodate large and small tires. This kit also includes (48) galvanized ¼” bolts (25” long), nuts, and washers for easy installation.
Common Questions on Autofonder Vehicle Wheel Chock Tie Down kit 1986lb Work Load Limit Ultimate Heavy Duty Trailer Tire Straps System for ATV,UTV,Lawn Mower
• What is the work load limit for the Autofonder Vehicle Wheel Chock Tie Down kit?1986 lb
• What type of vehicles is the Autofonder Wheel Chock Tie Down kit suitable for?
The Autofonder Wheel Chock Tie Down kit is suitable for ATV’s, UTV’s, and Lawn Mowers.
• How do you install the Autofonder Wheel Chock Tie Down kit?
The Autofonder Wheel Chock Tie Down kit is easy to install. Just put the chock in front or behind the wheel and secure it with the heavy duty straps.
• What are the dimensions of the Autofonder Vehicle Wheel Chock tie down kit?
The Autofonder Wheel Chock Tie Down kit is 12″ long, 8″ wide, and 6″ tall.
• How much does the Autofonder Vehicle Wheel Chock Tie Down kit weigh?
The Autofonder Wheel Chock Tie Down kit weighs 9 pounds.
Why We Like This
• 1. The Autofonder Vehicle Wheel Chock Tie Down kit can secure 4 tires at once with its 9’ x 2” yellow industrial grade E Track polyester ratchet straps.• 2. The kit also includes (8) 12 gauge steel wheel chocks that are powder coated for corrosion resistance, and (48) galvanized ¼” bolts (25” long), nuts, and washers.• 3. The straps are adjustable to fit tire sizes 10” 35” in diameter, and the double anchor slots on the chocks accommodate both large and small tires.• 4. This kit is perfect for tying down larger sized items like ATVs, UTVs, golf carts, riding mowers, and other off road vehicles to your trailer or pickup bed.• 5. The Autofonder Vehicle Wheel Chock Tie Down kit is backed by a 100% satisfaction guarantee.
Benefits of Atv Tie Down System
An All-Terrain Vehicle, or ATV, is a vehicle designed for off-road use. Often used in farming and other rural activities, they have become increasingly popular for recreation as well. To get the most out of your ATV experience, it is important to have a good tie down system.
There are many benefits of having a good tie down system for your ATV. Perhaps the most obvious benefit is that it will keep your ATV secure during transport. Tie downs help to distribute the weight of the vehicle evenly and prevent it from shifting during transit. This can protect both the vehicle and its passengers from damage.
Another big benefit of using tie downs is that they can help you save money on fuel costs. When an ATV shifts during transport, it can cause uneven wear on tires which leads to extra wear and tear and eventually replacement costs.
Buying Guide for Best Atv Tie Down System
When it comes to ATVs, there are many different ways to tie them down. Some people prefer Ratchet Straps, while others go with Bungee Cords. However, not all systems are created equal. Here is a quick guide on the best ATV tie down system for your needs.
If you’re looking for a simple and effective way to secure your ATV, ratchet straps are the way to go. They’re easy to use and they provide a tight hold that won’t let your ATV move around during transport. Just make sure that you get straps that are rated for the weight of your ATV so that they don’t break under the pressure.
Bungee cords are another popular option for securing an ATV during transport. They’re less expensive than ratchet straps and they provide a little bit of give which can be helpful if you hit a bump in the road. However, bungee cords can also come loose over time so they might not be the best option for long-term storage or transportation.
If you’re looking for something that’s more permanent, then strong ropes or chains are the way to go. You’ll need something with a little bit of give so that it doesn’t put too much strain on your vehicle but it should be sturdy enough to keep your ATV in place during transit. Just make sure that whatever you choose is rated for the weight of your ATV so that it doesn’t snap under pressure.
Frequently Asked Question
-What is the best atv tie down system for your needs?
This is a difficult question to answer as it depends on a variety of factors, such as the type and size of ATV, the type of terrain you’ll be riding on, and your personal preferences. Some ATV tie down systems are designed for specific models of ATV, while others are more universal. There are also a variety of tie down methods, such as ratchet straps, rope, or bungee cords. Ultimately, the best tie down system for your needs depends on your specific circumstances.
-Is an atv tie down system necessary?
If you are transporting your ATV on a trailer, then a tie down system is necessary in order to secure the ATV to the trailer.
-How does an atv tie down system work?
The ATV tie down system consists of two parts: the ratchet and the strap. The ratchet is used to tighten the strap around the ATV. The strap goes through the ratchet and is pulled tight. The ratchet is then locked into place, holding the strap tight.
-How do you install an atv tie down system?
Installing an atv tie down system is a fairly simple process. Most systems come with all the necessary hardware and instructions. Simply find a suitable location on the atv to install the system, and follow the instructions provided.
-What are the benefits of an atv tie down system?
An atv tie down system can keep your atv from moving around in the back of your truck or trailer, and it can also help protect your atv from damage.
Conclusion
Thank you for your time. The best ATV tie down system is a great investment to keep your ATV secure while you’re transporting it. With its easy installation and heavy-duty security, this system is the best way to go when you need to transport your ATV. Thanks again for your time, and we hope that you’ll consider investing in the best ATV tie down system.